Thanks to their high accuracy and fast load recovery time, the R&S NGM200 power supplies are perfect for challenging applications. Their two-quadrant architecture allows them to function both as a source and a sink to simulate batteries and loads. Their short recovery times enable them to handle fast load changes that occur, for example, when mobile communications devices switch from sleep mode to transmit mode. High-speed data acquisition and convenient battery simulation widen the range of applications.
Max. output power: 120 W
Voltage per channel: 0 V to 20 V
Max. current per channel: 6 A
Resolutions down to 1 µV/10 nA
500 ksample/s high-speed data logging
Specifications:
|
Number of output channels |
1/2 |
|
Total output power |
max. 60 W/120 W |
|
Maximum output power per channel |
60 W |
|
Maximum output current per channel |
≤ 6 V: 6 A > 6 V: 3 A |
|
Voltage ripple and noise (20 Hz to 20 MHz) |
< 500 µV (RMS) < 2 mV (peak-to-peak) (meas.) |
|
Current ripple and noise (20 Hz to 20 MHz) |
< 1 mA (RMS) (meas.) |
|
Load recovery time (10 % to 90 % load change within a band of ± 20 mV of set voltage) |
< 30 µs |
|
Programming resolution voltage |
1 mV |
|
Programming resolution current |
0.1 mA |
|
Current ripple and noise (20 Hz to 20 MHz) |
< 1 mA (RMS) (meas.) |
|
Output measurements |
|
|
Readback resolution voltage |
20 V range: 20 µV 5 V range: 5 µV |
|
Readback resolution current |
10 A range: 20 µA 1 A range: 2 µA 100 mA range: 200 nA 10 mA range: 20 nA |
|
Readback accuracy voltage ± (% of output + offset) |
10 A range: < 0.05 % + 2.5 mA 1 A range: < 0.05 % + 1 mA 100 mA range: < 0.05 % + 100 µA 10 mA range: < 0.05 % + 15 µA |
|
Special functions |
|
|
Measurement functions |
voltage, current, power, energy |
|
Protection functions |
OVP, OCP, OPP, OTP |
|
FuseLink function |
● |
|
Fuse delay at output-on |
● |
|
Sense function |
● |
|
Sink mode |
● |
|
Output sequencing |
● |
|
Trigger input/output |
● |
|
Arbitrary function |
● (QuickArb) |
|
Analog/modulation interface |
- |
|
Data logging |
● (Standard and FastLog) |
|
Display and interfaces |
|
|
Display |
TFT 5" 800 pixel x 480 pixel WVGA touch |
|
Rear panel connections |
connector block with 4 lines per channel |
|
Remote control interfaces: standard |
USB, LAN |
|
Remote control interfaces: optional |
Wireless LAN, IEEE-488 (GPIB) |
|
General data |
|
|
Dimensions (W × H × D) |
222 mm × 97 mm × 436 mm |
|
Weight |
7.2 kg/7.4 kg |
|
Rack installation |
R&S®HZN96 option |
|
Available Models |
||||
|
Models |
Number of output channels |
Max. output power |
Output voltage per channel |
Output current per channel |
|
R&S NGM201 |
1 |
60 W |
0 V to 20 V |
≤ 6 V: 0 A to 6 A |
|
R&S NGM202 |
2 |
120 W |
0 V to 20 V |
≤ 6 V: 0 A to 6 A |
